Merlin 1200S Gas Interlock System - Please contact us directly on 0161 336 5065 for bespoke products not listed as we specialise in made-to-measure vents and custom designs.

Merlin 1200S - CV1200S
Merlin CV1200 Gas Interlock System

A cost effective Gas Interlock System

Description

The Merlin CT1200S ventilation interlock system is designed specifically for use in commercial kitchens to meet BS6173: 2001, which is now a much-recognised standard in the catering industry.
This panel is to be used when the kitchen appliances do have flame failure devices. Therefore Gas proving is not a requirement.

The Merlin CT1200S acts as an interlock between the ventilation system and the gas solenoid valve. It ensures the gas solenoid valve cannot be opened until the ventilation system is proven to be operating. The fans are monitored with air pressure differential switches.

To operate the Merlin CT1200S the fans should be turned to the “on” position, once our panel receives a signal to indicate the fans are operating turn the key to the “on” position this will open the gas solenoid valve. If the fans should fail, the “fan fault” LED on the panel will illuminate and the gas solenoid valve will close. When there is a “fan fault” the supply fan or extract fan led will flash to inform the electrician or kitchen staff which fan has failed.
Operating the system in the above manner will ensure the requirements of BS6173: 2001 are fully met where all the catering equipment has flame failure devices fitted.

 Features
  • Easy to install
  • Easy to use
  • Can be used with all Merlin panels.
  • 240v normally closed but others can be supplied on request
  • Three year warranty
  • UK Manufactured
Operation

To operate the Merlin CT1200S the fans should be turned to the “on” position, once our panel receives a signal to indicate the fans are operating turn the key to the “on” position this will open the gas solenoid valve. If the fans should fail, the “fan fault” LED on the panel will illuminate and the gas solenoid valve will close. When there is a “fan fault” the supply fan or extract fan led will flash to inform the electrician or kitchen staff which fan has failed.
Operating the system in the above manner will ensure the requirements of BS6173: 2001 are fully met where all the catering equipment has flame failure devices fitted.

! A Gas Safe installer would be required to fit the gas solenoid valve. Check the register at www.gassaferegister.co.uk.
 Download PDF  

All Merlin Range Gas Safety Products are delivered free of charge to mainland UK postcodes.

Order now for free delivery next day before 4pm!

Back to top